Builder Blogs

First attempt at making a steel boat, the Goliath-Pt 3

On January 16, 2018, in Builder Blogs, Builder Tips, Power Cruisers, Steel Construction, by Dan Hennis
1

You can read Part One of this blog here Part Two is here Feb. 2, 2018 – Installed the fantail deck edge angle. I had to notch the 1/8″ X 1″ angle to match the curve of the boat. Finished forming and installing the aft P & S top rails to the bulwarks. There are […]

First attempt at making a steel boat, the Goliath-Pt 2

On January 15, 2018, in Builder Blogs, Glen-L Styles, Steel Construction, by Dan Hennis
3

You can read Part One of this blog here To read the newest post of January 14, 2018 click here 18 February, 2017 – Although there has been 2 weeks since the last installment to the blog, I have actually achieved a fair amount of progress.  I have since finished the aft battery bay, and cut […]

Barrelback by Jim Peerless Video Log

On December 5, 2017, in Builder Blogs, Cold Molded Construction, Inboard Powered, by Gayle Brantuk
1

Jim Peerless, builder of the Glen-L inboard Barrelback 19, put together 3 videos documenting the building and launching of his boat. Jim resides in Canada and purchased his plans and fastenings as well as all of the underwater hardware and some deck hardware for his boat from Glen-L. He did a beautiful job building his boat […]

Titan Tug to take to the waters of Georgia Strait

4

Latest additions to the Blog   A note on the blog notes; I’m building the blog notes – latest at the top, oldest at the bottom.  So if something doesn’t make sense, scroll down and pick the story up where it starts, then work your way back to see where it finishes.  I am also […]

Glen-L Riviera Build By Donald Collier – Cookeville TN – Build Summary 5-7-16 Thru 11-23-17

On March 25, 2017, in Builder Blogs, Cold Molded Construction, Inboard Powered, by Donald Collier
0

  I started building the Riviera in October of 2015.  I have been writing a blog from the beginning documenting the progress.  The blog was getting very long very slow for me to update.  The first blog documents progress from October 1, 2015 to May 7, 2016.  This blog will cover the progress from May 7, 2016 […]

%d bloggers like this: