Cold Molded Construction

Barrelback by Jim Peerless Video Log

On December 5, 2017, in Builder Blogs, Cold Molded Construction, Inboard Powered, by Gayle Brantuk
1

Jim Peerless, builder of the Glen-L inboard Barrelback 19, put together 3 videos documenting the building and launching of his boat. Jim resides in Canada and purchased his plans and fastenings as well as all of the underwater hardware and some deck hardware for his boat from Glen-L. He did a beautiful job building his boat […]

Glen-L Riviera Build By Donald Collier – Cookeville TN – Build Summary 5-7-16 Thru 11-23-17

On March 25, 2017, in Builder Blogs, Cold Molded Construction, Inboard Powered, by Donald Collier
0

  I started building the Riviera in October of 2015.  I have been writing a blog from the beginning documenting the progress.  The blog was getting very long very slow for me to update.  The first blog documents progress from October 1, 2015 to May 7, 2016.  This blog will cover the progress from May 7, 2016 […]

Raptor Plastic Staple to Metal T50 Staple Comparison – Don Collier

On May 9, 2016, in Builder Blogs, Cold Molded Construction, by Donald Collier
0

I am building the Glen-L Riviera boat.  http://boatbuilders.glen-l.com/41211/glen-l-riviera-build-donald-collier-cookeville-tn/.  I am at the point of applying the final veneer.  After looking at other boat build blogs, websites, and pictures, I was not sure how best to temporarily fasten the veneer while the epoxy dries.  There is a lot of information logged by boat builders using various […]

Barrelback 20 By Greg Walters

On February 8, 2016, in Builder Blogs, Cold Molded Construction, Inboard Powered, by Greg
2

Just  a few pics of my Barrelback which I completed in October 2015 using Glen L plans. The boat runs a Ford pcm 351W engine which I built from the ground up.The steering is hydraulic which in retrospect was overkill but nice to have.I also fitted a hydraulic engine hatch lifter which makes small adjustments […]

Amazing Financial Situation from Sale of Home Built Barrelback

On July 23, 2015, in Cold Molded Construction, Inboard Powered, News From Gayle, by Gayle Brantuk
0

Many of you are familiar with James Hurley’s Barrelback because we’ve used it quite a bit on our site and in advertising. James recently contacted us to update his information in the Project Registry Archives on our site. It was so good to hear from him, so I asked if he was still using his […]

%d bloggers like this: