Plywood Construction

Carefully review all plans and instructions….

On June 18, 2018, in Builder Blogs, Builder Tips, Plywood Construction, by WalterH
0

“Carefully review all plans and instructions….” Whenever we start a “do-it-yourself” project, we invariably receive the sage advice, “Carefully review all plans and instructions before you begin construction.” But what does that really mean? I’m reminded of the certified document examiner who was testifying in court. After stating he had examined a particular document, the […]

Titan Tug to take to the waters of Georgia Strait

4

Latest additions to the Blog   A note on the blog notes; I’m building the blog notes – latest at the top, oldest at the bottom.  So if something doesn’t make sense, scroll down and pick the story up where it starts, then work your way back to see where it finishes.  I am also […]

The Zip on the River Nile

On June 12, 2018, in Builder Blogs, Plywood Construction, by Ayman
0

I was born and lived all my life by the River Nile, Cairo, Egypt. I share many of my childhood memories with the Nile. I swam, fished, rowed, and sailed on the Nile. Building my Zip will reinforce my relationship with the river and make me happier. A few years ago, I got introduced to […]

Glen-L – Key Largo build, nr. Sydney Australia

On May 11, 2018, in Builder Blogs, Builder Tips, Inboard Powered, Plywood Construction, by jaguarrh
1

Taking the plunge and starting a larger project. I have been considering building a boat for many years. Firstly I was taken by the simplicity of a Michael Storer “Goat Island Skiff” and learning to sail. Then I was captivated by some pictures of a “Melon Seed Skiff”. Finally, I saw a picture of a […]

Comparative Weights of Plywood, Aluminum and Steel

On September 14, 2017, in Aluminum Construction, Designer Articles, Plywood Construction, Steel Construction, by Glen L. Witt
2

We are frequently asked if a design can be built in some other material than that noted. Any of our plans intended for planking with sheet material are designed to be a segment of a cylinder or a cone called “conendric” development. This usually means sections of the hull will be straight lines or convex. […]

%d bloggers like this: