Archives

Glen-L – Key Largo build, nr. Sydney Australia

On May 11, 2018, in Builder Blogs, Builder Tips, Inboard Powered, Plywood Construction, by jaguarrh
0

Taking the plunge and starting a larger project. I have been considering building a boat for many years. Firstly I was taken by the simplicity of a Michael Storer “Goat Island Skiff” and learning to sail. Then I was captivated by some pictures of a “Melon Seed Skiff”. Finally, I saw a picture of a […]

Titan Tug to take to the waters of Georgia Strait

4

Latest additions to the Blog   A note on the blog notes; I’m building the blog notes – latest at the top, oldest at the bottom.  So if something doesn’t make sense, scroll down and pick the story up where it starts, then work your way back to see where it finishes.  I am also […]

Turning Your Hull

On October 11, 2017, in Builder Tips, by tedhanneman
3

Editor’s Note: There are many ways to turn your boat and we appreciate Ted Hanneman sharing his version with us. Since Glen-L boats are built upside down, it’s necessary to turn the hull over to complete it at some point. Ted is building the Glen-L CS-20 which is a 20 foot Stitch and Glue design. […]

2016 Top 10 Glen-L Boat Plans

On February 3, 2017, in Glen-L Styles, by Gayle Brantuk
0

It’s been a while since we’ve done a Top 10 Glen-L Boat Plans list, so I thought it was time! The top 2 haven’t changed, but there are some surprises that have snuck in. I hope you enjoy the list and let me know what you think. It’s time to decide which one you’ll build […]

Spray Rails The Why, What and Where

On December 2, 2016, in Builder Tips, News From Gayle, by Gayle Brantuk
0

One of our Barrelback builders called today asking where the spray rails go and what material to use. On this design the plans call for 5/8″ net x 1-1/2″ x 20′ mahogany or similar for the spray rails. But, you may be asking, “what’s a spray rail?” Well, it’s a piece of wood attached to […]

%d bloggers like this: