The Latest

Building the Celerity

On September 26, 2011, in Glen-L Styles, Outboard Powered, by jprice
4

Here’s my Celerity build. Started the weekend of The Gathering 2011 (9/16/2011).

 

The workshop

Step 1: Sell old boat to make room for building new boat.

 

white oak and marine ply

Step 2: Go get a lot of wood.

 

Layout

Laying out the frames

 

Frame 1:

I used a slightly modified frame build process.   I created filler blocks for all joints where the gussets would be.  Used a biscuit joiner to join all the sections.  This made the assembly and lineup very simple by just pulling all the pieces together by hand, and lining it up on the layout board.  Once the epoxy cured, it was one solid frame.  No issues with anything shifting when the gussets were to be attached.  This also adds additional strength to the frame.

Frame 1 glue up

glue up with filler blocks

Attached gussets: (piece of cake!)

Frame 1

Frame 1 complete

 

Temporary pause from the boat building to build an outboard motor stand. (to give credit where credit is due, I copied the design from here: http://forums.iboats.com/showthread.php?t=266570).  Only changes to the design were adding 2″ to the height and width, and it’s a good thing I did.  The motor barely fit on there as is.

I wasn’t planning on getting an outboard now, but along came a deal that I couldn’t pass up.

Plus it’s just in time for the transom build, so I have all the exact measurements based off the motor dimensions.

a little bigger than I wanted, but it should still work.

 

Transom complete (with the exception of the motorboard and the cutout)

 

Stem, breasthook, and transom knee.  All cutout and laminated together.

 

Laminating the boards for the stringers (and attaching the breasthook to the stem with the leftover epoxy):

 

Form done!  A bit of a challenge getting the whole thing straight, square, and level (the stringers not being perfectly straight added to the challenge)

 

Finally starting to look somewhat boat shaped! (took a little over 2 months to get to this point… not sure if that’s fast or slow)

taking shape... woohoo!

Related Images:

Your Thoughts?


4 Responses to Building the Celerity

  1. John P. says:

    Thank you, very much! I hadn’t seen your response until Gayle Brantuk called my attention to it. She seems really on top things. I sorry to hear that the boat is yet to be finished, but completely understand how houses and life can get in the way of avocations! But the pictures are wonderful for me to look at. Thank you again. I’m intrigued by a non-boat element: you have a product apparently intended to coat the interior of rusted steel tubes and channels. I’d never heard of it. Cool.

    Good luck with all your projects.

    Cheers,
    John P

  2. John says:

    Hello J price. I’ve enjoyed your long thread about building a Celerity. But it seems to end just as you start decking. Have you finished the boat? I assume so, and I’d like to see further pictures. Unfortunately, the address you gave for your picassa albums is no longer working…I gather google changed things around. Can you please give me a current picassa address? I’d really appreicate it.

    Cheers,
    john P

    • jprice says:

      Thanks John.
      It’s been quite a journey. As expected, life got in the way. Bought a new house that we fully renovated, as well as several other projects taking my time.
      The construction of the boat is 99% done. Mainly what’s left is getting an outboard and installing that and the controls and electronics.
      The hold up there (other than funds) is that i don’t have the space in my current garage for that.
      So the current plan is either an outbuilding, or a garage extension. Yay! more projects! lol

      So my boat project isn’t dead, just on a long hiatus.

      Regarding the web album, I’ll have to look into that. I haven’t touched it in a while.

Leave a Reply

Your email address will not be published. Required fields are marked *

*