Archives

Don Collier – Cookeville, TN Riviera Build Part 3

On October 2, 2020, in Glen-L Styles, by Donald Collier
0

This is the third blog on my Riviera build. Below are links to the first and second blogs. https://boatbuilders.glen-l.com/43852/glen-l-riviera-build-by-donald-collier-cookeville-tn-build-summary-part-2/ November 1 – November 30, 2019 – Started installing the gas tank. I ordered a Moeller 25 gallon inboard gas tank with the mounting clips. The clips secure the gas tank from moving but allow for […]

Malahini Boat Build By Elio Ascenzo- Stage 6

On August 27, 2019, in Builder Blogs, Glen-L Styles, Outboard Powered, Plywood Construction, by Elio Ascenzo
0

In this stage of building the Glen-L Malahini, I focused on the hardware, trailer set up, sign writing and registration for the boat. I also decided to add carpet to the floor. Related Images:

Malahini Boat Build By Elio Ascenzo- Stage 5

On August 22, 2019, in Builder Blogs, Outboard Powered, Plywood Construction, by Elio Ascenzo
1

During this stage of building the Glen-L Malahini, I sanded the timber back, applied 4 coats of epoxy and then applied paint and clear finish. I decided to go for a blue stripe in the middle of the boat, blue and white on the sides and a natural timber finish elsewhere. Related Images:

Malahini Boat Build By Elio Ascenzo – Stage 1

On August 9, 2019, in Builder Blogs, Outboard Powered, Plywood Construction, by Elio Ascenzo
0

I am Elio Ascenzo from Melbourne, Australia and when I decided to build the Glen-L Malahini, it was a bit more difficult starting off here in Melbourne as I didn’t have the same timber choices as the boat builders in the USA. So, after a lot of research and discussions with timber merchants, I decided […]