Archives

Super Spartan Build by Roberta Part 4

On January 12, 2012, in Glen-L Styles, Outboard Powered, by Gayle Brantuk
0

To read the previous posts in this series, click the links below: Part 1 Part 2 Part 3  December 2, 2011 I haven’t accomplished much lately as I am waiting for the mahogany for the coamings, sheers and carlings. It’s supposed to be here by Dec. 6th, but that is not cast in stone. I […]

Super Spartan Build by Roberta Part 3

On December 9, 2011, in Glen-L Styles, by Gayle Brantuk
2

To read the previous posts in this series, click the links below: Part 1 Part 2 Wednesday, November 23, 2011 I completed fitting up the frames into the chine/bottom assembly and have been sanding and gluing them in this week. I leveled out the bottom and did frame 1 and 3 yesterday. Today I did frame […]

Super Spartan Build by Roberta Part 2

On November 30, 2011, in News From Gayle, Outboard Powered, by Gayle Brantuk
6

We’ll continue to follow Roberta’s progress on her Super Spartan build as posted on our Forum. If you’d like to read the first blog post, you can read it here. Thursday, November 17, 2011 This morning I installed the floor battens, the next step in the order of business. I struggled a bit trying to […]

Building the Celerity

On September 26, 2011, in Glen-L Styles, Outboard Powered, by jprice
0

Here’s my Celerity build. Started the weekend of The Gathering 2011 (9/16/2011).         Frame 1: I used a slightly modified frame build process.   I created filler blocks for all joints where the gussets would be.  Used a biscuit joiner to join all the sections.  This made the assembly and lineup very simple […]

The Basics Needed to Build a Boat

On March 16, 2011, in Build Your Dream Boat Series, News From Gayle, by Gayle Brantuk
0

Sometimes it helps to go back to the basics whether it’s with marketing a business or building a boat. We are frequently asked what you need to get started building your own boat. So, I thought it would be a good idea to spell out for you what you need to get started.  Let’s say […]