Archives

Riviera by Mike Yelverton

On August 26, 2019, in Builder Blogs, Inboard Powered, Plywood Construction, by Mike Yelverton
0

Building the Riviera was a very long journey. You will find pictures in my Gallery that show it starting a long while back. It took two phases. Phase one, in the first home and shop took me to the completion of the hull. Phase two finished the boat in my second home and shop. By […]

Glen-L Riviera Build By Donald Collier – Cookeville TN – Build Summary Part 2

On May 24, 2019, in Builder Blogs, Cold Molded Construction, Inboard Powered, by Donald Collier
3

(Note: if you want to read this in sequential order, start from the bottom) I started building the Riviera in October of 2015.  I have been writing a blog from the beginning documenting the progress.  The blog was getting very long very slow for me to update.  The first blog documents progress from October 1, 2015 to […]

Glen-L Riviera Build By Donald Collier – Cookeville TN – Build Summary 10-1-15 Thru 5-7-16

On April 16, 2019, in Builder Blogs, Inboard Powered, Outboard Powered, by Donald Collier
11

This blog documents progress from 10-1-15 Thru 5-7-16.  See the second blog that documents progress from 5-7-16 to date.  The following Link will take you to the Riviera build part two.  Riviera Part Two Progress 10-1-15 Thru 5-7-16 The featured image is not the Riviera, but is close.  I will be increasing the Riviera length […]

Barrelback 20 By Greg Walters

On February 8, 2016, in Builder Blogs, Cold Molded Construction, Inboard Powered, by Greg
2

Just  a few pics of my Barrelback which I completed in October 2015 using Glen L plans. The boat runs a Ford pcm 351W engine which I built from the ground up.The steering is hydraulic which in retrospect was overkill but nice to have.I also fitted a hydraulic engine hatch lifter which makes small adjustments […]

New Riviera Project!

On June 30, 2015, in Builder Blogs, Cold Molded Construction, by dp3aia
3

As my wife calls it whenever I venture out to the shop to start a new furniture project, I’m going to start “sawing wood” for a new Riviera! This is something I have wanted to do for a very long time. I will be an active participant on this site, and hope to learn answers […]

%d bloggers like this: